Bullseye Level Portable Wheel Balancer

• Point 1
• Point 2

This is a well made balancer. The tooling is good, it's very sturdy, well worth the money. Others I looked at had rough castings and a weak looking structure. And the road test after balancing all four wheels proved that it does a good job.

Save Up To 90 Off Now

I was tired of getting tires balanced and they where not balanced. Now I can do just as good or better then the shops can at balancing.My first set of tires were 265 75 r16.Came out the ride was smooth as glass.I also checked my brake drums to see if they were balanced. This thing will work if you can figure it out.Maybe some day I will make a video to show how to use it.Tell then if you have any problems using it maybe I can help. Also you need to make sure that the needle on the base is in the center of the tire balance or the bubble will be off. My bubble was set right out of the box.The needle that fits into the bottom of the tire balance can get off center easily. You have to put the tire on gently.If you notice the bubble is not in the center of the bulls eye,check to make sure the needle is centered.Also I put some oil on the 4 rods where the springs are at just to make sure they were not dragging anywhere.Also the centering cone was smaller then what the rim of my wheels were.So what I did was center the wheels by hand on the ring above the springs which worked out fine.Also don't put all the weights on one side.Divide them up,50/50 front and back of the rim.