- Revolutionary new device easily installs mushroomshaped rubber plugs into all tubeless tires on the wheel
- Plugging device drives the pluginto the hole with a twist of the Allen wrench; plug then expands under pressure to fill the punctured area; a firm pull on the stem seats the mushroom head on the inner wall allowing no air to escape
- Pocket Tire Plugger kit includes plugging device, nozzle adapter, rasp tool, probe tool, retractable razor blade, Allen wrench, 15 mushroom plugs (5/16 dia. x 3/4 L stem), laminated instructions and comes in 31/2 x 71/2 zippered pouch; total weight only 12 oz.
- Pocket Tire Plugger with CO2 contains all the above plus four 16g canisters of CO2 gas and a 4 flexible adapter with solid brass fittings for the most effective repair possible without dismounting your tubeless tire; kit comes in a 5 x 71/2 x 1 zippered pouch; total weight only 18 oz.

I just used this product while out in some very back roads in Oregon without a motorcycle repair shop in site for over 100 miles. Just a little pointer, make sure you stop and take a look at your tires when your turns start to feel like you are sliding; this may not be the road at all, but your tire going flat. This is the second flat I have had and I have tried to talk myself into the road conditions being the cause of my bike feeling funny when it was actually a tire going flat.
This product worked quickly and easily. It is well designed. However, the four CO2 cartridges are inadequate for filling a cycle tire completely and you end up with about 25 pounds in the tire. Granted, this is enough to make it to an air supply under reasonable speeds, but I would recommend the unit that has the pump instead of the cartridges. The physics of the repair are excellent, not requiring glue. I punished the tire considerably for 3 more days after the repair without any trouble and would not hesitate to go further if the tire didn't need replacing otherwise.

0 comments:
Post a Comment